What is the height and width of the load-bearing walls?

[zihadhosenjm40]

the first concerns insulation. There is no more space with an air gap under the structure, so the issue of insulation should be approached more seriously. If you do not make thermal insulation of the structure, then in the summer the attic will overheat, and in the winter, on the contrary, it will be overcooled. In any case, the temperature (high or low) will be transferred to the house. Correct calculations and high-quality insulation will help to eliminate this;
when creating a ceiling immediately under the roof made at a slight angle, the house will not have an upper air gap and attic space. And in this case, it is impossible to organize living space;
Due to the slight slope, which ranges from 5 to 10°, snow and moisture will accumulate on the single-pitched surface.

Despite all the obvious disadvantages, a pitched roof is an ideal option for creating a garage and other buildings on the site.


Calculation of the design of a single-pitched roof
This is the first step before installing the rafter system. It is ghana mobile database to make a detailed plan or drawing to be used as a guide during the work. To create this diagram, you need to select the following data:

the total width of the roof structure, as well as the length of the spans that are formed between the load-bearing walls;
slope angle, desired or achieved;
the length of a single-pitched roof;
selected roofing material;

Please note: When a pitched roof is being created for a shed, garage or summer house, you can simply raise the front wall of the structure higher than the back.

As a result, the angle of the slope will depend on the height of the rise. The second option involves the creation of supports on which the purlin will be laid. The second method allows you to save building materials.

For drawings you need to know the following nuances: