How to install a boiler in an apartment

[zihadhosenjm40]

The best solution is to achieve autonomy in this matter, to have your own water heater at home, and best of all – a storage-type boiler, so that a supply of hot water is always “at hand”. But how to choose a boiler for an apartment so that it fully meets the expectations of the owners? And the second problem is how to install a boiler in an apartment so that it works correctly and does not pose any danger to residents? Answers to these questions will be given in this publication.

Types of domestic storage boilers
First of all, it is necessary to navigate the variety of storage water heaters, since there are quite a few of them, but not all of them can be suitable for the conditions of a particular apartment.

First of all, boilers are divided into direct or indirect heating devices.

1. Indirect heating water heaters do not use energy sources in the form of electricity, gas, solid or liquid fuel. Water used for domestic needs (often called sanitary) is heated by heat exchange from an internal circuit connected to the heating system (sometimes other sources of hot water are used, for example, circuits romania mobile database to solar heat accumulators).

Schematic diagram of an indirect heating boiler

The figure shows the basic diagram of such a water heater.

Cold sanitary water enters the boiler tank (2) through the tube (8).
Hot boiler technical water circulates through the heat exchanger (6), which gives off its heat to the sanitary water. There may be several heat exchangers, they are in the form of coils (as in the picture) or are arranged according to the principle of "tank in a tank".
Heated sanitary water is collected through the pipe (11).