Laying tiles
You can lay tiles on the prepared surface. The laying ivory coast mobile database be done "away from yourself", that is, the master should be on the newly laid surface, and it is better not to stand on the prepared sand cushion. When laying, you need to leave gaps of 2-3 mm between individual tiles. Special wedges are used to fix the gaps.
The laying procedure involves immersing the tiles in sand by about half their thickness. The tiles are laid in rows. After each row, the quality of the laying must be checked and any defects that arise must be eliminated immediately. You must move around the laying very carefully during the work so as not to displace the tiles until they are fully fixed.
Sealing of seams
To fix the tiles and make the covering smooth, it is necessary to seal the seams. For this purpose, sand is taken and mixed with cement powder. The laid masonry is covered with this dry composition. After that, using a brush, the mixture is distributed along the laid path so that it fills all the seams.
The excess mixture should be swept away, and then the masonry should be wetted with water. When wet, the concrete will expand, and the masonry mixture will be fixed in the seams. After this, the spacers (wedges) can be removed. Subsequently, the mixture in the seams will need to be renewed periodically. This may be necessary, for example, after heavy rains.
Sealing joints in paving slabs
Pros and cons of paths made of paving slabs on a sand cushion
Paving slabs laid on a sand and gravel bed give the landscape design of the site a respectable and finished look. Thanks to the variety of tiles, you can choose a suitable option for any architectural style of the house.