Tape measure for taking precise measurements;

[zihadhosenjm40]

Light weight. This parameter is important both in terms of transportation and installation. Lightweight planks can be fixed even with liquid nails.
Easy to install. Such trims are installed as simply as possible using a minimum of necessary tools.
Affordable cost. Plastic products will cost less than wooden or metal analogues.

The material also has its drawbacks. Thin PVC products are not impact-resistant enough, which is why they can be easily broken during installation or careless use. Casings are not frost-resistant enough, so they should be used indoors, they are not suitable for the street.

DIY installation
When starting to install PVC casings, you cyprus mobile database to know that long plastic elements should be handled very carefully during transportation and work with them, so as not to break them. A set of necessary tools and materials:

marker for making marks;
jigsaw or hacksaw for metal;

hammer, screwdriver (for hammering nails or screwing in screws);
fasteners with which the mounting strip will be fixed (nails without heads, self-tapping screws, liquid nails);
drill or screwdriver (if installation with self-tapping screws is assumed).
If the casings are to be cut at an angle of 45 °, a special strip device can be used for this.

Installation specifics

Before installation, make sure that the width of the strip allows you to hide all the defects that exist along the doorway. If the space between the frame and the wall was filled with polyurethane foam, it should not protrude, creating additional irregularities. The installation of plastic trims itself takes place in several stages: