Cut off the bottom of the bottle and one of the sides like a child's shovel.
Posted: Mon Feb 10, 2025 9:33 am
You need to make a couple of holes in the bottom of one of the small bottles, and then insert it into the base bottle.
"One and a half" bottle #2 must be cut in such a way that a funnel is formed. It must be inserted into the neck of the first 1.5-liter bottle.
Finally, after adding the food, you need to screw the lids on the bottles.
Automatic bottle feeder
Those who are going to make such a “dining room” for birds will need 2 bottles (their volume does not matter).
First bottle:
Step back at least 3 cm from the cut end and cut a hole slightly larger spain mobile database the neck of the second bottle.
A bird feeder made from a plastic bottle is very easy to make if you follow the step-by-step instructions.
You don’t have to do anything with the second bottle: you just need to remove the lid and pour food inside.
Then:
Insert the second bottle upside down into the opening of the first bottle and secure them together with hot glue.
Make two tiny holes in the bottom of the second bottle, a short distance apart. Put one end of the rope through the hole and pull it out of the other (loop down). Tie the ends of the rope together in a strong knot.
Do the same operation with the bottom of the first bottle.
Feeder with dispenser from 2 plastic bottles
To make a bird feeder with automatic feeding with your own hands, you will need a couple of plastic bottles: 5 l and 1.5 l. In the larger bottle, you need to cut large holes around the entire perimeter, which must be located at least 2 cm from each other and from the top and bottom of the bottle.
"One and a half" bottle #2 must be cut in such a way that a funnel is formed. It must be inserted into the neck of the first 1.5-liter bottle.
Finally, after adding the food, you need to screw the lids on the bottles.
Automatic bottle feeder
Those who are going to make such a “dining room” for birds will need 2 bottles (their volume does not matter).
First bottle:
Step back at least 3 cm from the cut end and cut a hole slightly larger spain mobile database the neck of the second bottle.
A bird feeder made from a plastic bottle is very easy to make if you follow the step-by-step instructions.
You don’t have to do anything with the second bottle: you just need to remove the lid and pour food inside.
Then:
Insert the second bottle upside down into the opening of the first bottle and secure them together with hot glue.
Make two tiny holes in the bottom of the second bottle, a short distance apart. Put one end of the rope through the hole and pull it out of the other (loop down). Tie the ends of the rope together in a strong knot.
Do the same operation with the bottom of the first bottle.
Feeder with dispenser from 2 plastic bottles
To make a bird feeder with automatic feeding with your own hands, you will need a couple of plastic bottles: 5 l and 1.5 l. In the larger bottle, you need to cut large holes around the entire perimeter, which must be located at least 2 cm from each other and from the top and bottom of the bottle.