To prepare the material and cut the parts, do the following:
Posted: Mon Feb 10, 2025 6:54 am
apply the prepared pattern to the surface using a triangle, pencil, or template so that the accuracy of the lines is fully preserved;
place the material on a surface, only a flat one;
cut the board along the drawn lines;
for shaped parts you can use a jigsaw or milling equipment;
sand the edges of all elements sequentially with coarse sandpaper, then fine sandpaper;
cover the surface with varnish and leave until completely dry;
then apply the second layer;
wait until the surface is well dried, after which pakistan mobile database can proceed to their installation.
Marking the board
We cut out the necessary parts
Sawing a board
The shaped elements are cut out with a jigsaw
Varnish coating
If unplaned board is used during work, all knots should be removed, the surface should be sanded well with sandpaper. The recesses should be masked with putty. The shelves in the wardrobe for shoes and things should stand clearly, without tilts, curvatures, therefore, before moving, as you begin to assemble the parts, it is necessary to apply the appropriate marks of the attachment points of the modules. To do this, you should accurately maintain all the parameters provided by the drawing. The marks are made with a technical pencil after measuring.
place the material on a surface, only a flat one;
cut the board along the drawn lines;
for shaped parts you can use a jigsaw or milling equipment;
sand the edges of all elements sequentially with coarse sandpaper, then fine sandpaper;
cover the surface with varnish and leave until completely dry;
then apply the second layer;
wait until the surface is well dried, after which pakistan mobile database can proceed to their installation.
Marking the board
We cut out the necessary parts
Sawing a board
The shaped elements are cut out with a jigsaw
Varnish coating
If unplaned board is used during work, all knots should be removed, the surface should be sanded well with sandpaper. The recesses should be masked with putty. The shelves in the wardrobe for shoes and things should stand clearly, without tilts, curvatures, therefore, before moving, as you begin to assemble the parts, it is necessary to apply the appropriate marks of the attachment points of the modules. To do this, you should accurately maintain all the parameters provided by the drawing. The marks are made with a technical pencil after measuring.