Video – DIY Wooden Winter Greenhouse

[zihadhosenjm40]

The door frame is assembled from a 20 mm thick board. Intermediate ties are used for reinforcement. The door is fixed in the doorway using hinges. For a year-round greenhouse, the door on the north side can be made solid from plywood with insulation. It is recommended to use polystyrene or foam plastic as insulation.
Please note! After completing the frame assembly, it is recommended to coat the wood with an antiseptic or paint it with a wood composition again.

For year-round greenhouses, it is recommended iran mobile database
use polycarbonate with a thickness of 6-10 mm with a reinforced structure. It not only has high thermal insulation, but is also able to withstand significant loads.

Reinforced polycarbonate with additional stiffening ribs

The covering is mounted on the greenhouse using polycarbonate profiles. This will allow it to be secured without damage or loss of thermal insulation properties.

Polycarbonate is placed so that its internal cavities are located vertically. This will facilitate the drainage of condensate and protect the coating from clouding.

Correct placement of polycarbonate

Installation begins with the end and side walls. Polycarbonate is cut to the required size, the top is sealed with aluminum tape, and the bottom is treated with perforated tape. The end profile is put on the cuts.

Installation of end profile