poured wooden floor and insulated concrete screed.
Posted: Sun Feb 09, 2025 10:29 am
Prev 1of1
Durable cement-bonded particle boards (CBPB), at least 12 mm thick, are installed on the waterproofing. A border of the same material is made along the perimeter.
Prev 1of1 Prev 1of1
A metal mesh with a rod of at least 10 mm is laid out in the resulting space. After that, a concrete screed of 10-12 mm thickness is poured.
Prev 1of1 Prev 1of1
This design does not indicate an important nuance - there is no drain hole for organizing the drainage of water from the washroom and steam room. The plan for its placement can be seen in the diagram below.
Prev 1of1
The finishing layer for the concrete screed floor covering in the bathhouse is also indicated here - this is, as a rule, porcelain stoneware tiles. In addition, here you can see that in the diagram the floors of the steam room or washroom are made with a slope. To organize such an angle, the concrete screed is poured along beacons made of wood at a certain angle from the walls to the drain hole.
Prev 1of1
Another option, which uses mineral wool insulation together with extruded polystyrene foam (EPS), is shown in the following diagram.
Prev 1of1
A slightly more complex design with a
Prev 1of1
A good option for creating a thermal barrier around the cameroon mobile database creating it, it is important to consider that the soil next to the bathhouse will move and the enclosing structure should not have rigid connections with the bathhouse.
How to make a floor in a bathhouse on piles with your own hands: Instructions
The first thing to do is to make sure that all the necessary trenches have been dug in the ground to accommodate the sewer pipes and water supply channels, if any.
Prev 1of1
After which the floor joists are reinforced from below with subfloor boards.
Prev 1of1
Durable cement-bonded particle boards (CBPB), at least 12 mm thick, are installed on the waterproofing. A border of the same material is made along the perimeter.
Prev 1of1 Prev 1of1
A metal mesh with a rod of at least 10 mm is laid out in the resulting space. After that, a concrete screed of 10-12 mm thickness is poured.
Prev 1of1 Prev 1of1
This design does not indicate an important nuance - there is no drain hole for organizing the drainage of water from the washroom and steam room. The plan for its placement can be seen in the diagram below.
Prev 1of1
The finishing layer for the concrete screed floor covering in the bathhouse is also indicated here - this is, as a rule, porcelain stoneware tiles. In addition, here you can see that in the diagram the floors of the steam room or washroom are made with a slope. To organize such an angle, the concrete screed is poured along beacons made of wood at a certain angle from the walls to the drain hole.
Prev 1of1
Another option, which uses mineral wool insulation together with extruded polystyrene foam (EPS), is shown in the following diagram.
Prev 1of1
A slightly more complex design with a
Prev 1of1
A good option for creating a thermal barrier around the cameroon mobile database creating it, it is important to consider that the soil next to the bathhouse will move and the enclosing structure should not have rigid connections with the bathhouse.
How to make a floor in a bathhouse on piles with your own hands: Instructions
The first thing to do is to make sure that all the necessary trenches have been dug in the ground to accommodate the sewer pipes and water supply channels, if any.
Prev 1of1
After which the floor joists are reinforced from below with subfloor boards.
Prev 1of1