Page 1 of 1

There are two main ways of laying out slabs.

Posted: Sun Feb 09, 2025 6:17 am
by zihadhosenjm40
Laying pattern from corner

The easiest way is to start from one far corner of the room. This method is considered the fastest. All novice tilers do it this way, or if they have to work in small narrow rooms or rooms with complex geometry.

The second method is more complicated - laying from the middle of the room to the sides. This is how tiles are laid in large and free spaces. In this case, the room is divided into four equal parts. The first line is drawn from the middle of one wall to the opposite one, the second is also in the middle, perpendicular to the first. Laying begins from any corner formed in the center of the room. In this case, you will have to cut the tiles along the perimeter of the room. Using this method of laying, a more attractive pattern is formed.

Laying pattern from the center

You can also choose the direction of saudi arabia mobile database tiles. You can lay them diagonally or in the usual straight way. The first looks much more beautiful, but to create it you need to have experience in such work. That is why the second method of laying is much more common.

Styling drawings

Whichever method you use, you will still have to cut the tiles. Here it is important to remember one recommendation. Try not to cut too narrow strips, they will look bad. At least 20 percent of the area should remain from the full tile. Also, make sure that the most visible area is laid out from whole tiles.