We remove the glass
Posted: Thu Feb 06, 2025 6:38 am
It is necessary to wash the floors in the room where the glass will be re-glued, and also spray the air with a spray bottle so that the dust settles.
Even a small amount of dust getting under the glass can spoil its appearance and create unevenness.
How to glue correctly
The usual instructions for gluing glass to a phone are not suitable in this case, since you need to carefully prepare not only the screen, but also the film itself, otherwise it will lie unevenly or remain dirty.
To prevent the glass from cracking, it must be removed correctly. It is important to distribute the load over the entire surface, removing it from the two upper corners and moving el salvador mobile database the lower ones. Removing the glass may not be as easy as it seems at first glance. The glass is thicker than regular film and can break. To prevent this from happening, you need to pry its edge with a plastic card or tape from two corners, and slowly move towards the other edge.
It is not recommended to use sharp objects, because you can scratch not only the protective coating, but also the phone.
We remove dust
To remove dust from the screen, you need to use a special microfiber cloth. If you don’t have one, a regular wet wipe will do, but after that you need to additionally use a regular dry cloth.
Screen degreasing
A simple way to degrease the screen:
Even a small amount of dust getting under the glass can spoil its appearance and create unevenness.
How to glue correctly
The usual instructions for gluing glass to a phone are not suitable in this case, since you need to carefully prepare not only the screen, but also the film itself, otherwise it will lie unevenly or remain dirty.
To prevent the glass from cracking, it must be removed correctly. It is important to distribute the load over the entire surface, removing it from the two upper corners and moving el salvador mobile database the lower ones. Removing the glass may not be as easy as it seems at first glance. The glass is thicker than regular film and can break. To prevent this from happening, you need to pry its edge with a plastic card or tape from two corners, and slowly move towards the other edge.
It is not recommended to use sharp objects, because you can scratch not only the protective coating, but also the phone.
We remove dust
To remove dust from the screen, you need to use a special microfiber cloth. If you don’t have one, a regular wet wipe will do, but after that you need to additionally use a regular dry cloth.
Screen degreasing
A simple way to degrease the screen: