Classic wooden flooring option in the bathroom
Posted: Thu Feb 06, 2025 4:30 am
Wooden floor for bathroom
One of the great properties of wood is that it is quite easy to make wooden floors in the bathroom with your own hands. The installation of wooden flooring is a little more complicated than regular floorboards, but laying a floor in the bathroom will not be difficult even for a novice carpenter. Therefore, before trying to lay cold and slippery tiles in the bathroom, it makes sense to try your hand at building a real sea deck.
To avoid problems with warping and rotting of wooden structures, the floor in the bathroom is made in the image and likeness of the design used in the steam room of a bathhouse or the deck of a fishing schooner. In fact, the wooden floor is made double:
The subfloor is also called the wet floor, as it collects all the water, dirt and residues of cleaning products that fall on the bathroom floor;
The top wooden floor should be laid from water-resistant types of wood, preferably ash or oak.
Larch is considered to be the most durable, but in practice, there are not many people who want to lay and walk on a dark and not very attractive surface in the bathroom, so bleached and tinted oak is the best choice.
The lower subfloor must be thoroughly belgium mobile database . For this purpose, you can use liquid rubber as the first layer, or a special butyl-styrene coating waterproofing used to insulate pool bowls, ponds, and large concrete tanks.
If the subfloor is made of planks, then before laying the waterproofing, it is necessary to sew the floorboards at the joints with nails or screws, remove the paint and sand the surface with coarse sandpaper.
The subfloor base is impregnated with an antiseptic and thoroughly dried. If the base is made of concrete, then it will be necessary to insulate the bathroom floor with foam plastic, lay moisture-resistant plywood, install support joists for the finished wooden floor in the bathroom, and only then apply the coating waterproofing.
After the insulation layer has dried, it remains to lay the top finishing floor. Pre-planed and treated with waterproof varnish boards are laid on joists on tenons or wooden pins. It is forbidden to hammer nails or screw screws into the wood. Even if you put a layer of protective varnish on top, the fastening points will rust.
One of the great properties of wood is that it is quite easy to make wooden floors in the bathroom with your own hands. The installation of wooden flooring is a little more complicated than regular floorboards, but laying a floor in the bathroom will not be difficult even for a novice carpenter. Therefore, before trying to lay cold and slippery tiles in the bathroom, it makes sense to try your hand at building a real sea deck.
To avoid problems with warping and rotting of wooden structures, the floor in the bathroom is made in the image and likeness of the design used in the steam room of a bathhouse or the deck of a fishing schooner. In fact, the wooden floor is made double:
The subfloor is also called the wet floor, as it collects all the water, dirt and residues of cleaning products that fall on the bathroom floor;
The top wooden floor should be laid from water-resistant types of wood, preferably ash or oak.
Larch is considered to be the most durable, but in practice, there are not many people who want to lay and walk on a dark and not very attractive surface in the bathroom, so bleached and tinted oak is the best choice.
The lower subfloor must be thoroughly belgium mobile database . For this purpose, you can use liquid rubber as the first layer, or a special butyl-styrene coating waterproofing used to insulate pool bowls, ponds, and large concrete tanks.
If the subfloor is made of planks, then before laying the waterproofing, it is necessary to sew the floorboards at the joints with nails or screws, remove the paint and sand the surface with coarse sandpaper.
The subfloor base is impregnated with an antiseptic and thoroughly dried. If the base is made of concrete, then it will be necessary to insulate the bathroom floor with foam plastic, lay moisture-resistant plywood, install support joists for the finished wooden floor in the bathroom, and only then apply the coating waterproofing.
After the insulation layer has dried, it remains to lay the top finishing floor. Pre-planed and treated with waterproof varnish boards are laid on joists on tenons or wooden pins. It is forbidden to hammer nails or screw screws into the wood. Even if you put a layer of protective varnish on top, the fastening points will rust.